Flyingvoice FWR9202 Dual-Band VoIP Router Nairobi, Kenya

 

Flyingvoice FWR9202 Dual-Band VoIP Router Nairobi, Kenya

The Flyingvoice FWR9202 Dual-Band VoIP Router Nairobi, Kenya is a stand-alone device, which requires no PC to make Internet calls. It is equipped with 1 FXS port, 4 LAN ports, and 1 WAN port to enhance communication. Its built – in Wi-Fi connectivity allows you to make faster and cheaper calls over the internet.  The Flyingvoice FWR9202 Dual – Band VoIP Router also supports T.38 real-time FAX and T.30 Fax with G.711 codec.

Category:

Description

Flyingvoice FWR9202 Dual-Band VoIP Router Kenya

The Flyingvoice FWR9202 Dual-Band VoIP Wireless Router integrates internet sharing for daily application, making it the best choice for any VoIP communication. It not only provides for high quality voice communications, but also offers Access Point (AP) function to meet your daily wireless communication needs. FWR9202 Dual-Band VoIP Wireless Router is SIP v2.0 – based, enabling you to make calls via Proxy voice communications, IP sharing, as well as the QoS mechanism. It meets the 802.11n wireless standards and is fully compatible with most internet service providers.

The magnificent Flyingvoice FWR9202 Dual-Band VoIP Wireless Router has 2 FXS telephone ports and 5 10/100Mbps Ethernet ports which are greatly convenient when deploying VoIP networks. Included USB 2.0 port enables the user to easily connect to external storage services, thus achieving a smooth file sharing. You can use your FWR9202 Dual-Band VoIP Wireless Router as an FTP server to share LAN files, pictures and other media, making it ideally suitable for small and medium enterprises.

Flyingvoice FWR9202 Dual-Band VoIP Router Features :

  • 2 FXS (Foreign Exchange Subscribers) Ports :
    •  Foreign Exchange Subscribers is the port that actually delivers the analog line to the subscriber. it is simply the “plug in the wall” that delivers a dial tone, battery current and ring voltage. This is the jack or interface to the phone system which FXO devices can be connected to. The Flyingvoice FWR9202 Wireless VoIP Router has been equipped with 2 FXS ports to maximize communication while using your telephone to make calls, thus maximizing work productivity.
  • Dual – Band Radio, Gigabit Speeds :
    • The Flyingvoice FWR9202 Wireless VoIP Router supports Wi-Fi® Wireless connections from a speed of 2.4GHZ(300Mbps) to a speed of 5GHz(867Mb). This enhanced feature offers you unparalleled convenience when it comes to content sharing and audio streaming.
  • USB 2.0 Host Port :
    •  The Flyingvoice FWR9202 Wireless VoIP Router is equipped with a USB 2.0 port, enabling you to easily connect to external storage devices such as U Disk and removable hard disk. This makes it easy to share files and other multimedia content.
  • Firmware Upgradeable :
    •  You can easily update the operating system on your Flyingvoice FWR9202 VoIP Wireless Router so as to improve its functionality and enhance user experience. Upgrading firmware also fixes any existing bugs and protects you from any kind of software malfunctions and  vulnerabilities. To update your router’s firmware, type your router’s IP address into your web browser and enter your login information. Then locate the Firmware or Update section and download the latest firmware update on your router manufacturer’s website. Finally, upload the update and reboot the router.
  • Highly Versatile :
    •  The Flyingvoice FWR9202 VoIP Wireless Router pushes versatility to a new high, thanks to its ability to complement already existing fixtures for enhanced web and audio conferencing, as well as other communication needs. This makes it easy to integrate seamlessly into any office setup without disorienting earlier structures and work ethic. Furthermore, the device is easy to redeploy as the business grows and needs to transform.
  • Management  Platform :
    • The Flyingvoice FWR9202 VoIP Wireless Router delivers convenience, reliability and seamless integration through the Flyingvoice Device Management Platform via an installed unified firmware. The platform is also used to troubleshoot and solve some of the common complexities that sometimes come during provisioning, call management, and quality control. It also enhances user experience and adoption, making it easy to consolidate clients under one platform. This not only makes the device easy to deploy and maintain, but also gives you the ability to keep it at par with new and advanced firmware updates, thus a reduction in upgrade, maintenance and operational costs. The Flyingvoice FWR9202 VoIP Wireless Router is, thus, a perfect solution regardless of the variations in your company’s needs.
  • SIP Convenience :
    • The Server-Initiated Application (SIP) is incorporated for users to plug and play the phone without the need for configurations. Once the phone is connected to the network and powered on, initialization commences automatically, after which the phone is up and ready for use. Furthermore, the Flyingvoice FWR9202 VoIP Wireless router can not only be configured via a user interface, it also accepts SIP NOTIFY messages from SIP proxy servers, which gives it an ability to act as a web server. You can therefore easily connect your FlyingVoice FWR9202 VoIP Router to your IP PBX System or direct to a VoIP service provider in order to enjoy seamless conference calls. The Flyingvoice FWR9202 VoIP Wireless router is based on SIP v2 (RFC 3261, 3262, 3263, 3264) and works perfectly with most of the SIP platforms such as Asterisk,3CX,  and BroadSoft  that currently exist in the market.
  • Automated – Provisioning :
    • The technologically advanced Flyingvoice FWR9202 VoIP Wireless Router has the ability to deploy information technology or telecommunications service by using embedded pre-defined procedures that are carried out electronically without requiring any human intervention, thus making it very reliable and convenient.
  •  Technical Report (TR – 069) :
    •  This is a technical specification of the Broadband Forum that defines an application layer protocol for remote management of customer-premises equipment (CPE) connected to an Internet Protocol (IP) network. The TR-069 embedded in the Flyingvoice FWR9202 VoIP Router uses the CPE WAN Management Protocol (CWMP) to provide support for functions such as auto-configuration, software or firmware image management, software module management, status and performance managements, and diagnostics. The CPE WAN Management Protocol is a bidirectional SOAP – and HTTP-based protocol, and provides the communication between a CPE and auto configuration servers (ACS). The protocol addresses the growing number of different Internet access devices such as modems, routers , gateways, as well as end-user devices which connect to the Internet, such as set-top boxes , and VoIP devices such as the Flyingvoice FWR9202.
  • Rich QoS Capabilities :
    • Quality of Service (QoS) is a feature of routers and switches which prioritizes traffic so that more important traffic can pass first, resulting in an overall performance improvement for critical network traffic. This feature is very useful in the Flyingvoice FWR9202 VoIP Wireless Router whenever there are high volumes of traffic, therefore eliminating any delays while working.
  • Voice Clarity :
    • The Flyingvoice FWR9202 VoIP Wireless Router offers users distraction-free communication courtesy of the inbuilt industry-leading Acoustic Echo Cancelling Technology,  Adaptive Jitter Buffer, Voice Activity Detection, and Comfort Noise Generation that deliver superior High Definition sound quality devoid of extraneous noises. This makes it possible to enjoy fluent phone conversations.

CALL FEATURES 

  • Conference Guide :
    •  This advanced feature of the Flyingvoice FWR9202 VoIP Wireless Router helps the user to easily set up group calls with a single click of a button. The hi – tech device allows for 3 – way group calls, thus enabling the user to easily join or create meetings.
  • Call Transfer :
    • This advanced feature of the Flyingvoice FWR9202 Wireless VoIP Router allows the user to relocate an inbound call to another phone or messaging system by using a dedicated call transfer button, or software that has been configured for use on the Wireless Router.
  • Call Waiting :
    • You can hear another incoming call when you are already on an active phone call (beep). With the Flyingvoice FWR9202 VoIP Wireless Router, you can also turn off call waiting so that incoming calls are directly sent to voicemail during moments you are active on another phone call.
  • Call Holding :
    • You can easily place an active phone call on hold in order to make or pick another incoming call using the premium Flyingvoice FWR9202 VoIP Wireless Router.

Flyingvoice FWR9202 Dual-Band VoIP Router Specifications :

VoIP SoC

  • CPU:MT7620A MIP1004KC 580MHz

Flash

  • 16MB Flash

RAM

  • 64MB DDR2 RAM

Power

  • AC/DC Adapter

AC Input: 100~240V, 50~60Hz

DC Output: 12V, 1.5A

Operating System

  • Linux 2.6.36

I/O Interfaces

  • 1 RJ-45 for WAN Port (Ethernet 100 Base-T)
  • 4 RJ-45 for LAN Port (Ethernet 100 Base-T)
  • 2 RJ-11 for FXS Port
  • 1 USB 2.0 Host Ports
  • IEEE802.11 b/g/n
  • IEEE802.11 ac

Environmental

  • Operation Temperature: 0~50 Degree C
  • Storage Temperature: -25~ 85 Degree C
  • Relative Humidity: 10%~90% No Condensing

Audio Codec

  • G.711(A/u),PESQ>4.3
  • G.729AB,PESQ>3.7
  • Adaptive Jitter Buffer Management
  • Voice Activity Detection
  • Comfort Noise Generation
  • Echo Cancellation
  • T.30 FAX with G.711
  • Real time FAX over IP via T.38

Key Features

  • Hardware NAT(HNAT) engine with 100Mbps NAT/NAPT speed
  • 2X2 2.4G 802.11 b/g/n(300 Mbps)
  • 2X2 5G 802.11ac (867 Mbps)
  • 2.4GHz and 5GHz should work simultaneously
  • Support VoIP FXS port with SIP and T.38 FAX
  • 1 USB 2.0 Host Ports for storage

Management

  • Firmware Upgrade
  • Web Management Interface
  • IVR-driven Management Interface
  • Local and Remote Syslog (RFC3164)
  • Auto Provisioning
  • SNTP Time Synchronization
  • Multi User Level
  • SNMP v2
  • Telnet
  • TR069
  • System Log: local log and remote log
  • Suppo Support Flying FCMS Cloud Management

Protocols

  • SIP V2.0 (RFC 3261, 3262, 3263, 3264)
  • Session timer (RFC4028)
  • SDP (RFC2327)
  • RTP/RTCP (RFC823/903)
  • NAPTR for SIP URI lookup (RFC2915)
  • STUN (RFC2030)
  • ARP/RARP (RFC 826/903)
  • SNTP (RFC 2030)
  • DHCP/PPPoE
  • HTTP Server for Web Management
  • TFTP/HTTP for Auto Provisioning
  • Message Waiting Indicator (RFC3842)
  • DHCP Option Codes for SIP (RFC3361)
  • DNS/DNS SRV (RFC1706 and RFC 2782)
  • IEEE802.1Q VLAN/802.1p and IP DSCP

Applications

  • MAC address cloning
  • NAT Traversal by STUN
  • Built-in Wired speed NAT Router
  • DHCP Server and Client
  • IP conflict detection
  • Port Forwarding, DMZ, SuperDMZ
  • 802.1Q VLAN/802.1p, DSCP, Rate Limiting
  • VPN(PPTP,L2TP, IPSec) Passthrough
  • SNTP
  • IGMPv2, IGMPv3
  • ACL(Access Control List)
  • Broadcast Strom Control
  • Mac Filtering
  • Firewall(SYN Flooding, IP Spoofing, Smurf Attack, Ping of Death, DoS)
  • Ipv6(Dual Stack)
  • MLDv1, MLDv2

Wireless

  • 4 SSID Per Radio
  • Static WEP(64/128bit)
  • Dynamic WEP(64/128bit)
  • AES(CCMP/TKIP)
  • MAC certification
  • WEP certification
  • WPA-PAK/WPA-PSK(2.0)
  • WPA/WPA2
  • AP Isolation and MBSSID AP Isolation
  • WMM
  • WDS
  • WPS
  • Station list
  • Radius certification and billing
  • MAC Filter(different from wired MAC Filter)

Call Features

  • 3-way conference
  • Call hold
  • Call forwarding
  • Call Transfer
  • Call waiting
  • Caller ID and CWCID
  • DTMF Relay: In-band, Out-band and SIP INFO
  • QoS Layer 3
  • Call Log
  • CID/CWCID
  • Dial Plan
  • DTMF Mode: Inband, RFC2833 and SIP Info

Regulatory

  • FCC Part 15 Class B appoval
  • CE certification
  • RoHS compliance

SIZE and Weight

  • 173mm(L)x153mm(W)x40mm(H)
  • 300g(N.W)